INVESTIGATION THE EFFECT OF BLADE OUTLET ANGLE ON THE PERFORMANCES OF THE CENTRIFUGAL PUMP USING COMPUTATIONAL FLUID DYNAMICS

  • Duong Hai Nam University of Economics and Industrial Technology
  • Nguyen Thanh Binh University of Economics and Industrial Technology

Abstract

The performance of centrifugal pumps is highly dependent on the geometrical parameters of the impeller profile. Although, it is possible to determine these parameters based on the design documentation. In many cases, however, the instruction ends with specifying the parameter’s range rather than a specific value. Therefore, the impeller design process does not guarantee optimal performance. In this paper, Computational Fluid Dynamics (CFD) analysis of the flow through the impeller with different impeller configurations is performed. Different configurations of impellers are obtained by considering impellers with different exit blade angles (16°, 20° and 25°) and different number of blades (5, 6 and 7). The Ansys BladeGen, Ansys TurboGrid, and Ansys-CFX modules are used for geometry modeling, meshing, and solving, respectively. Based on the CFD analysis, it can be seen that the maximum hydraulic efficiency is achieved for impellers with 25° and 7 blades.

References

Bai L, Zhou L, Han C, Zhu Y, Shi W, Numerical Study of Pressure Fluctuation and Unsteady Flow in a Centrifugal Pump. Processes, 2019, Volume 7, pp. 1-14. https://doi.org/doi:10.3390/pr7060354.

Rakibuzzaman R, Suh S-H, Kim H-H, Cho M-T, Shin B-R, Cavitating Flow Analysis of Multistage Centrifugal Pump. KSFM J Fluid, Mach 2015, Volume 18, pp. 65-71. https://doi.org/10.5293/kfma.2015.18.1.065.

Zhu B, Chen H, Wei Q, Numerical and experimental investigation of cavitating characteristics in centrifugal pump with gap impeller. Int J Turbo Jet Engines, 2014, Volume 31, pp. 187-196. https://doi.org/10.1515/tjj-2013-0046.

Wang C, He X, Shi W, Wang X, Wang X, Qiu N, Numerical study on pressure fluctuation of a multistage centrifugal pump based on whole flow field. AIP Adv, 2019, Volume 9. https://doi.org/10.1063/1.5049196.

Bacharoudis EC, Filios AE, Mentzos MD, Margaris DP, Parametric Study of a Centrifugal Pump Impeller by Varying the Outlet Blade Angle. Open Mech Eng J, 2008, Volume 2, pp.75-83. https://doi.org/10.2174/1874155x00802010075.

Gulich JF, Centrifugal pumps. 4th ed. Villeneuve, Switzerland: Springer Nature Switzerland AG; 2020.

Ding H, Li Z, Gong X, Li M, The influence of blade outlet angle on the performance of centrifugal pump with high specific speed. Vacuum, 2019, Volume 159, pp. 239-246. https://doi.org/10.1016/j.vacuum.2018.10.049.

Fu Y, Yuan J, Yuan S, Pace G, D’Agostino L, Huang P, et al., Numerical and experimental analysis of flow phenomena in a centrifugal pump operating under low flow rates. J Fluids Eng Trans ASME, 2015, Volume 137. https://doi.org/10.1115/1.4027142.

Pavlenko I, Kulikov O, Ratushnyi O, Ivanov V, Piteľ J, Kondus V, Effect of Impeller Trimming on the Energy Efficiency of the Counter-Rotating Pumping Stage. Appl Sci, 2023, Volume 13.

Li Q, Li S, Wu P, Huang B, Wu D. Investigation on Reduction of Pressure Fluctuation for a Double-Suction Centrifugal Pump. Chinese J Mech Eng (English Ed), 2021, Volume 34, pp. 2-18. https://doi.org/10.1186/s10033-020-00505-8.

Abo Elyamin GRH, Bassily MA, Khalil KY, Gomaa MS. Effect of impeller blades number on the performance of a centrifugal pump. Alexandria Eng J, 2019, Volume 58, pp. 39-48. https://doi.org/10.1016/j.aej.2019.02.004.

Sharma A. Computational Fluid Dynamics Development, Aplication and Analysis. London: Wiley, 2017.

ANSYS Inc. ANSYS Fluent Meshing User’s Guide, Ansys, 2015, Vol. 15317.

Madenci E, Guven I. The finite element method and applications in engineering using Ansys. Springer, 2015.

Published
2023-09-28