DEVELOPMENT OF BIOMEDICAL SUPERALLOYS FOR DENTAL RESTORATION AND ORTHOPEADIC TECHNIQUE OF BONES

  • To Duy Phuong Institute of Materials Science, Vietnam Academy of Science and Technology
Keywords: Dental Superalloys, Medical application, Titanium, Nickel, Corrosionresistance, Biocompatibility, Orthopaedics

Abstract

This paper presents on the results of research, production and applications of metals and alloys in dental and orthopeadic applic ation. The subsequent section then explains some of the most basic methods of research and production processing, and utilisation of biomedical metals and alloys. Biomedical superalloys are not only for applying in dental use, but also use for bone orthopeadics developing with promising results.Especially, Titanium has many useful features including low specific gravity, half that of nickel, excellent corrosion resistance and strength, high biocompatibility, and non-magnetic properties useful for orthopaedic application. The alloys such as Ni-Cr, Ni-Ti, Ti-Al-V, Co-Cr were investigated and resulted utilizationin this paper.

References

Tô Duy Phương, Báo cáo khoa học tổng kết đề tài “Nghiên cứu công nghệ chế tạo hợp kimnha khoa

nikencrômmolybdentitan” Viện KH&CN Việt Nam 2008-2009

Tô Duy Phương, Báo cáo khoa học tổng kết đề tài “Nghiên cứu chế tạo hợp kim NiCrMoTi làm vật

liệu chấn thương chỉnh hình nha khoa”,Viện Khoa học Vật liệu 2006

Wylie C M, Shelton R M, Fleming G J, Davenport A J.Corrosion of nickel-based dental casting

alloys [J]. Dental Materials, 2007, 23: 714-723.

Geis-Gérstorfer J, Sauer K H, PaslerK. Ion release from Ni-Cr-Mo and Co-Cr-Mo casting alloys [J].

International Journal of Prosthodontics, 1991, 4: 152-158

Goff A H L, Joiret S, Abourazzou K D. Raman investigation of crevice corrosion in Ni-Cr dental

alloys containing Be [J]. Electrochimica Acta, 1998, 43: 53-62.

Bumgardner J D, Lucass L C. Surface analysis of Ni-Cr dental alloys [J]. Dental Materials, 1993, 9:

-259.

Pan J, Geis-Gerstorfer J, Thierry D, Leygrff C. Electrochemical studies of the influence of beryllium

on corrosion resistance of Ni-25Cr-10Mo cast alloys for dental applications [J]. Journal of

Electrochemical Society, 1995, 142: 1454-1458.

Huang H H. Surface characterization of passive film on NiCr based dental casting alloys [J].

Biomaterials, 2003, 24: 1575-1582.

Liu L, Li Y, Wang F. Influence of microstructure on corrosion behaviour of a Ni-based superalloy

in 3.5wt.% NaCl [J]. Electrochimica Acta, 2007, 52: 7193-7202.

Hodgson A W E, Kurz S, Virtanen S, Fervel V, Olsson C O A, Mischler S. Passive and transpassive

behavior of CoCrMo in simulated biological solutions [J]. Electrochimica Acta, 2004, 49:

-2178.

Kocijan A, Milosev I, Pihlar B. Cobalt-based alloys for orthopedic applications studied by

electrochemical and XPS analysis [J]. Journal of Materials Science Materials in Medicine, 2004, 15:

-650.

Dee KC, Puleo DA, Bizios R. An introduction to tissue-biomaterial interactions. New York: WileyLiss 2002; pp. 53-88.

Park JB. Biomaterials science and engineering. Plenum. New York: Wiley-Liss 1984; pp. 193-233.

Published
2017-01-12
How to Cite
To Duy Phuong. (2017). DEVELOPMENT OF BIOMEDICAL SUPERALLOYS FOR DENTAL RESTORATION AND ORTHOPEADIC TECHNIQUE OF BONES . UTEHY Journal of Science and Technology, 12, 36-46. Retrieved from https://tapchi.utehy.edu.vn/index.php/jst/article/view/233