STUDY ON STABILITY SPEED AND REDUCING ELECTROMAGNETIC TORQUE RIPPLES FOR BLDC MOTOR FED BY VOLTAGE SOURCE INVERTER

  • Nguyen Thi Thuy Duong Hung Yen University of Technology and Education
  • Do Quang Huy Hung Yen University of Technology and Education
  • Doan Van Dien Hung Yen University of Technology and Education
Keywords: voltage source inverter, BLDC motor control

Abstract

This paper presents the study on stability speed BLDC motors in general by means of the voltage source inverter, the inverter is an IGBT full bridge. By taking the signal from the Hall sensors which mounted in the rotor to generate control signals for the inverter. The output of the inverter is connected to the stator windings of motor. Electromotive force of the motor is controlled via the control switching modes of inverter bridge. The motor speed is stable through the automatic voltage regulator power supply.

References

A. Kusko and S.M. Peeran, Definition of Brushlees Permanent Magnet Motor, inConf., Rec., IEEE-IASAnnual Meeting, 1 (1988), pp. 20-22.

J. P. Johnson and M. Ehsani, Review of Sensorless Methods for Brussless DC Motor, in Conf., Rec., IEEE-IASAnnual Meeting, (1999), pp.143-150.

Lefley, P., L. Petkovska, and G. Cvetkovski, Optimization of the Design Parameters of an Asymmetric Brushless DC Motor for Cogging Torque Minimization in Power Electronics and Applications, EPE 2011, Proceeding of the 2011-14thEuropean Conference on 2011.

N. Mohan, W. P. Robbin, and T. Undeland, Power Electronics: Converters, Applications, and Design, 2nd ed. New York: Wiley, (1995)

Gamazo-Real, José Carlos, Ernesto Vázquez-Sánchez, and Jaime Gómez-Gil, Position and Speed Control of Brushless DC Motors Using Sensorless Techniques and Application Trends, Sensors (Basel, Switzerland) 10.7 (2010), pp. 6901–6947.

Published
2017-07-10
How to Cite
Nguyen Thi Thuy Duong, Do Quang Huy, & Doan Van Dien. (2017). STUDY ON STABILITY SPEED AND REDUCING ELECTROMAGNETIC TORQUE RIPPLES FOR BLDC MOTOR FED BY VOLTAGE SOURCE INVERTER. UTEHY Journal of Science and Technology, 14, 42-48. Retrieved from http://tapchi.utehy.edu.vn/index.php/jst/article/view/185