AN EXPERIMENTAL STUDY ABOUT THE FLANK WEAR OF END MILL WHEN STEEL PROCESSING 45 ON THREE AXES CNC MILLING HIGH SPEED MACHINE

  • Phan Van Hieu Hung Yen University of Technology and Education
Keywords: End mill, flank wear, 3 axes CNC milling high speed machine

Abstract

This paper presents experimental studies on the influence of some technological factors on cutting tool wear when machining steel 45 on high speed 3-axis CNC machines. Experiments were conducted on the Super MC 500 high-speed milling machine. The author has used the experimental planning method to construct empirical formulas describing the influence of the cutting speed technology parameters, the amount of knife running to the back of the knife. These rules are the basis for determining the right technology parameters, thereby improving the durability of the cutting tool, optimizing the cutting process.

References

Bành Tiến Long, Bùi Ngọc Tuyên. Lý thuyết tạo hình các bề mặt cơ khí, NXB Giáo dục, 2013.

Phạm Văn Bổng, Nghiên cứu tối ưu hóa khi gia công bề mặt trụ ngoài trên máy tiện CNC, Luận án Tiến sỹ, 2007.

Nguyễn Doãn Ý. Quy hoạch thực nghiệm, NXB Khoa học và kỹ thuật, 2003.

Nguyễn Quốc Tuấn, Mối quan hệ của chế độ cắt và tuổi bền dao phay cầu phủ TiAlN khi gia công thép Cr12MoV qua tôi. Tạp chí Khoa học & CN các Trường đại học kỹ thuật số tháng 71, 2009.

H.Z. Li, H. Zeng, X.Q. Chen, An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts. Original Researchm Article Journal of Materials Processing Technology, December 2006, Volume 180, Issues 1–3, 1, pp. 296-304.

I.N. Tansel, T.T. Arken, W.Y.Bao, N.Mahendrakar, Tool wear estimation in micro machining. Part I: tool usage cutting force relationship. International Journal of Machine tool & Manufacture 40, 2000, pp. 599 – 608.

Chen Zhang, Jilin Zhang, Online tool wear measurement for ball end milling cutter based on mechine vision. Computers in Industry, 2013.

Published
2018-04-11
How to Cite
Phan Van Hieu. (2018). AN EXPERIMENTAL STUDY ABOUT THE FLANK WEAR OF END MILL WHEN STEEL PROCESSING 45 ON THREE AXES CNC MILLING HIGH SPEED MACHINE. UTEHY Journal of Science and Technology, 17, 14-17. Retrieved from http://tapchi.utehy.edu.vn/index.php/jst/article/view/122