• Dinh Van Ban Hung Yen University of Technology and Education
  • Le Van Thoai Hung Yen University of Technology and Education
Keywords: Metal inert gas welding (MIG); weld size; Taguchi’s method; orthogonal array; Analysis of Variance (ANOVA)


In fusion welding process, welded size greatly affects weld quality. The welded size is influenced by many factor during welding process; however it is significantly determined by welding parameters.
Therefore, determination of appropriate welding parameters for each weld joint plays an important rule for ensuring shape and size of weld. Moreover, it is especially meaningful for forming the weld which its
parent material has high castability. Taguchi method combined Analysis of Variance (ANOVA) was used to estimate optimized MIG parameters for assurance of the weld size and satisfaction of quality requirements of the welding joint


Nguyễn Trọng Hùng, Phùng Xuân Sơn. Giáo trình Thiết kế thực nghiệm trong chế tạo máy, NXB Xây dựng Hà Nội, 2016.

Ngô Lê Thông. Công nghệ hàn điện nóng chảy (tập 2), NXB Khoa học và kỹ thuật Hà Nội, 2007, tr. 271-279.

Bùi Minh Trí. Xác xuất thống kê và quy hoạch thực nghiệm, NXB Khoa học và kỹ thuật, Hà Nội, 2005.

Vineeta Kanwal1, R S Jadoun2, Optimization of MIG Welding Parameters for Hardness of Aluminium Alloys Using Taguchi Method. SSRG International Journal of Mechanical Engineering (SSRG-IJME), June 2015, Volume 2, Issue 6.

Hang Heavy Kim, Kang Yong Lee, Aplication of Taguchi metthod dilermine hybrid Weldinh contion of Aluminum alloy. Jounal of Slientific & Industrial Research, April 2009, Vol 68, pp. 296-300.

Omar Bataineh, Anas Al-Shoubaki, Omar Barqawi, Optimising Process Conditions in MIG Welding of Aluminum Alloys Through Factorial Design Experiments. Latest Trends in Environmental and Manufacturing Engineering, ISBN: 978-1-61804-135-7 .

G. Haragopal, P V R Ravindra Reddy, G Chandra Mohan Reddy and J V Subrahmanyam, Parametric design for MIG welding of Al-65032 alloy using Taguchi Technique. Journal of Scientific and Industrial Research, October 2011, Vol. 70, pp. 844-858.

Taguchi G., Chowdhury S., Wu Y., Taguchi’s Quality Engineering Handbook, John Wiley & Sons, New Jersey, 2005.

Rạnit K. Roy, Design of Experiments using the Taguchi Approach – 16 step to Product and process Improvement, Awiley – interscience publication, John willey & sons, inc 2001.

WELDING PARAMETERS–DAIHEN CORPRATION WELDING PRODUCTS DIVISION– 5.1 Minamisenroka settsu, Osaka 566, Japan. Tel: (06) 381-7041 Faes:(06)319-2562,Telex: 523-4222 DAIHENS



How to Cite
Dinh Van Ban, & Le Van Thoai. (2018). OPTIMIZING PARAMETERS FOR ENSURING ALUMINUM WELD SIZE OF MIG WELDING BY USING TAGUCHI METHOD. UTEHY Journal of Science and Technology, 18, 8-14. Retrieved from http://tapchi.utehy.edu.vn/index.php/jst/article/view/102